- Home
- Equipment
Refine by
Shand And Jurs Environmental Equipment & Supplies
93 equipment items found
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 95506 Cable Sheave Case is designed to operate on pressurized product storage tanks without loss of vapors. The entire unit consists of a roof plate and three sheave cases. For ease of operation and long service life, each sheave is bushed with bronze collar bushings. Standard sheaves can accommodate cables up to 3/4" diameter. For heavier cable requirements consult ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Shand & Jurs insulation jackets provide heat retention for equipment in cold weather environments. Construction of the insulating jacket is silicone impregnated woven glass cloth lining with 1'' thick fiber glass material. The jacket is easy to install and remove in the ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94510 Magnavent is a pressure operated emergency vent designed specifically to meet the NFPA ruling on venting requirements for small storage tanks. An economically designed and priced unit, the principle of operation is based on a unique magnetic ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94160 Pressure Relief Vent provides pressure relief for storage tanks and low pressure vessels. Utilizing a flange mounted design, this economical vent provides maximum flow capacity and high ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94126 Pressure Vent is designed to relieve pressure on low pressure storage tanks, and is ideally suited as a low cost rim vent on floating roof tanks. Also, it is suitable as an auxiliary pressure or emergency vent on small low pressure tanks. The Model 94126 is available in a 6-inch size only, with screwed ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94140 Spring Loaded Pressure Relief Vent reduces excessive venting of product in liquid storage tanks. Available for open or closed vent systems, this vent provides pressure relief by either venting vapor into the atmosphere or piping emissions in a closed loop ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94110 Vacuum Vent is designed using more than 90 years of experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in liquid product storage tanks, and also withstand the pressure of the stored product when not operating under a ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94103 Static Pressure Vacuum Vent design incorporates more than 90 years of experience in the development of quality safety and conservation fittings. This model is specifically designed to operate at static pressures up to 150psi and at temperature ranges from minus 50° to plus 200° Fahrenheit. Provisions for high vacuum settings are ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94115 Vacuum Vent has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in liquid product storage tanks, and also withstand the pressure of the stored product when not operating under a ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94240 Free Vents are designed for use on bulk liquid storage tanks containing non-volatile liquids. The Model 94240 Free Vent allows atmosphere and vapors to flow freely in and out of storage tanks, while the return bend design with screen protects against rain, dirt or other foreign matter. Vents are available in either cast aluminum or cast iron bodies. Installation ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 95210 Clamping Manhole Cover is designed as an economical solution that provides ready access to product storage tanks by means of an easily opened hinged ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs 95004 Gauge Hatch is designed to provide easy access to storage tanks for gauging product level or temperature and product sampling. Available in a 3 inch model only, it is spark-proof and designed for screw mounting to a threaded tank nozzle. The 95004 features a foot opening cover, which provides for padlocking cover to gauge body. Special cover design, prevents tampering ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs 95021 Gauge Hatch is designed to provide easy access to storage tanks for gauging product level or temperature and product ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs 95010 Gauge Hatch is designed to provide easy access to storage tanks for gauging product level or temperature or product sampling. Available in 6” and 8” sizes. This gauge provides for emergency venting up to 1 oz./in.2 Featuring a metalto-metal seat, foot pedal for easy opening, and a tape gauge marker. All sizes are drilled to match ANSI 150 Ib. ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs 94065 FRP Series Manhole Cover is designed to provide emergency venting and vacuum relief of low-pressure storage tanks and vessels. These covers also provide quick, easy access for tank inspection and maintenance. When the tank is exposed to abnormal internal pressure or vacuum beyond the capability of the conservation vent, the manhole protects the tank against costly ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs FRP 94063 Series Manhole Cover is designed to provide emergency venting relief of low-pressure storage tanks and vessels. These covers also provide quick, easy access for tank inspection and maintenance. When the tank is exposed to abnormal internal pressure beyond the capability of the conservation vent, the manhole protects the tank against costly ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94210 Emergency Vent and Manhole Cover is an economical solution to emergency venting requirements where intermediate pressure settings are required. The design of Model 94210 employs a flexible diaphragm affording a tight seal between the pallet and the corrosion resistant seat below set pressure. This also assures low leakage. The diaphragm is intended for normal ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94221 Emergency Vent and Manhole Cover provides emergency relief of excessive internal pressure and vacuum beyond that provided by tank conservation vent requirements. This weight loaded vent utilizes Expanda-Seal diaphragms which provide tight seals between pallets and seats. Special diaphragm materials are available for vents subjected to severe low temperatures or ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94201 Emergency Vent and Manhole Cover with Expanda-Seal is an economical solution to present day emergency venting requirements. It is designed to relieve excessive internal pressure in liquid storage tanks while providing excellent protection against costly tank roof rupture repair. The Expanda-Seal™ design also decreases product leakage below actual set point. ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Model 94225 Emergency Vent and Manhole Cover provides emergency relief of excessive internal pressure and vacuum beyond that provided by tank conservation vent ...